<%pageName = "start" %> EnLink Geoenergy, Inc. - Enlink Technology
  EnLink Technology   


The EnLink System - How it works
Instead of burning the energy candle at both ends by trying to cool with hot outside air, or heat with cold outside air like conventional HVAC methods, the EnLink System utilizes the earth's constant temperature as a source of renewable energy to create indoor comfort.
  • The process starts with a series of holes drilled hundreds of feet deep into the Earth where temperature is constant.
  • EnLink then uses a cost saving and patented process to insert into each hole two polyethylene pipes joined at the bottom.
  • Once the pipes reach the bottom of the hole, our patented Coil Tubing Unit, or CTU, pumps highly thermal conductive grout from the bottom to the surface as a solid backfill.
  • Near the earth’s surface, the pipes join to a common manifold.
  • From the manifold, interior piping is run to each highly efficient heat pump.
  • The heat pumps provide warm or cool air as needed to individual comfort zones throughout the building.
Click here for more information about the EnLink CTU.

Faster and more efficient installations can quickly add up to considerable savings for you.
Consider that the average loop contractor completes only two to three loops per day, which means the majority of the workday is consumed by installing and grouting vertical loops. In contrast, by using our CTU, the end result is a highly efficient and higher quality geothermal installation.

The Government Is On Our Side
According to the Environmental Protection Agency, a geothermal energy system like EnLink's is the most efficient, envrionmentally clean and cost-effective space conditioning system available.

EnLink's System uses considerably less electrical power than conventional HVAC, and leaves more energy available for the surrounding community. It also provides measurably cleaner air and more comfort, while greatly reducing maintenance and operating costs. Most importantly its source, the earth's ambient temperature, is constant and renewable.

It's clean, it's efficient, and it's cost effective.
It’s the best way to tap into the riches geothermal installation has to offer.
 

EnLink Geoenergy Services, Inc.
16430 Park Ten Place, # 600 - Houston, TX 77084
Tel : (281) 398.6880- Fax : (281) 398.6715

 web hosting and ongoing web development by DonDulin.com